Xerox Document Centre 420, User Manual

Page: 321 / 466

Xerox Document Centre 440/432/430/426/425/420 User Guide Page 11-25
Set
u
ps
Copy Setups
Refer to the following pages for the procedures for Copy
Setups, which includes programming the default settings for
the following features:
Reduce/Enlarge - page 11-26
Image Quality - page 11-28
Output - page 11-29
Sides Imaged - page 11-29
Expert Image Quality - page 11-31
Margin Shift (DC440/432/430/425) - page 11-31
Erase (DC440/432/430/425) - page 11-32
NOTE: These changes can only be made when a PIN
(Personal Identification Number) which has been assigned
Key Operator access rights is entered. The default password
is #22222 which may be used if PINs have not yet been
assigned.
Access the Copy Setups
Quick Pathway
¾ Select
[Access]
on the
Control Panel
¾ Enter Key Operator
PIN - see NOTE
¾ Select [Copy Setups] .
¾ Select [Access] on
the Control Panel.
A pop-up window will be
displayed on the Touch Screen.
¾ Select [#] on the Control
Panel and use the number
keypad to enter a
Key
Operator PIN.
¾ Select [Enter] in the pop-up
window.