Xerox Document Centre 420, User Manual

Page: 141 / 466

Xerox Document Centre 440/432/430/426/425/420 User Guide Page 4-25
Fa
x
Build Job
Use Build Job when both the Document Feeder and the
Document Glass are required within the same job, or if different
programming selections are required for pages or sections of
the job.
¾ Load the first section of the
document set.
¾ Select the features for the
first part of the job.
¾ Select [Build Job] and then
[On] .
¾ Select [Start] - the
documents will be scanned.
The [Build Job] feature
selection screen will appear on
the touch screen.
¾ Make any programming
changes for the next section.
¾ Load the documents and
select
[Start] .
Repeat the above steps until all
the sections of the document set
have been scanned in.
¾ Select [End Build Job] when
the last section of the job has
been scanned in. The job will
be faxed.
If the machine reaches a low
memory level during a build job
operation, the job will be
cancelled.