Xerox Document Centre 420, User Manual

Page: 110 / 466

Page 3-50 Xerox Document Centre 440/432/430/426/425/420 User Guide
NOTE: Inserts or Interrupt cannot be used with Build Job. The
Build Job 2 Sided selection will only copy Portrait documents
in Head to Head or Head to Toe orientation.
HINT: If a memory fault occurs, it is advisable to reduce the
number of originals from 50 to 40. The number of originals that
can be scanned depends on the complexity of the document
being scanned.
Stored Jobs
Up to 8 combinations of feature selections can be retained in
the machine memory as stored jobs. The machine stores only
the programming for the job,
not the image. Each time a stored
job is used, the image must be scanned. The Stored Job touch
screen displays a list of all stored jobs.
Stored jobs are set to Off as the default. Contact the Key
Operator to change this feature to On.
To store a job
¾ Program the job features.
¾ Select [Added Features] .
¾ Select [Job Assembly] .
¾ Select [Stored Job ].