Xerox Document Centre 420, User Manual

Page: 137 / 466

Xerox Document Centre 440/432/430/426/425/420 User Guide Page 4-21
Fa
x
Communication Mode ( DC440/432/430/425 )
On the DC440/432/430/425 this feature allows selection of the
communication mode used for transmission to a remote fax
machine.
NOTE: On the DC426/420 the Forced 4800 bps feature is the
only available option.
The following options are available:
Super G3 determines the communication mode to be used based on the
maximum capabilities of the remote fax machine. This mode
minimizes data transmission errors by using Error Correction
Mode (ECM). Initial communication speed will be 33,600 Bits
Per Second (bps).
G3 selects the communication mode based on the maximum
capabilities of the remote fax machine. Initial communication
speed will be 14,400 bps. ECM is also used with this option.
Forced 4800 bps used in areas of low-quality communication, or when
experiencing telephone noise, or when fax communications
are susceptible to errors. To minimize errors, set the
DC440/
432/430/426/425/420 to run at a communication mode of 4800.
This mode is slower, but it is less susceptible to errors.
In some regional areas, the use of the Communication Mode/
Forced 4800 bps feature is restricted.
¾ Load the document.
¾ Select [More Features] .
¾ Select [Communications
Mode] .
¾
Select the required option.
¾ Select [Save] and then
[Start] .