Xerox Document Centre 420, User Manual

Page: 77 / 466

Xerox Document Centre 440/432/430/426/425/420 User Guide Page 3-17
Co
py
Reduce / Enlarge options
100% size for size copies.
Auto automatically reduces / enlarges a document to fit on the paper
size selected.
NOTE: When Auto Reduce/Enlarge is selected , the machine
automatically selects 8 1/2” x 11” long edge feed paper. If
selecting
Auto Reduce/Enlarge and 8 1/2” x 11” long or short
edge paper supply, the machine automatically rotates the
image 90° to match the orientation of the 8 1/2” x 11”
documents and prints on to 8 1/2” x 11” long edge feed paper.
However, when using the Bypass Tray ensure that the paper
is loaded short edge feed. Feeding paper long edge feed will
cause a mismatch with the reduction/enlargement selection.
Presets displays the two most frequently used preset reduce / enlarge
settings. The presets are set up by the Key Operator.
Other used to specify a magnification not listed, or to select normal or
custom settings.
- Normal — reduces or enlarges the length and width of a
document by a specific amount. 100%, Auto and the
presets are also available. For non-standard sizes, use
the scroll buttons to choose a specific enlargement or
reduction in 1% increments.
¾ Select [Auto] or one of the
presets options.