Xerox DocuCentre-III C4100 Manual Download Page 383

Page: 383 / 523

Error Code

381

rob
le

m Solving

016-786

[Cause] When using the scanning feature, the machine could not

write the file to the hard disk.

[Remedy] Take one of the following actions:

Turn the machine off and on.

Load paper on the paper tray if needed.

If the error occurs when sending an e-mail, take one of

the following solutions:

- Lower the resolution.
- Reduce the size.
- Reduce the number of pages, and divide the job

into several e-mails to send.

Send the job by setting [Color Scanning] to [Black &

White].

016-787

[Cause] The server IP address specified in the job template is

invalid.

[Remedy] Specify the correct job template.

016-788

O [Cause] Failed to retrieve a file from the Web browser.

[Remedy] Take one of the following actions, and try again.

Reload the browser page.

Restart the browser.

Turn the machine off and on.

016-789

O O [Cause] Insufficient space available for mail processing.

Processing was interrupted.

[Remedy] Reduce the resolution or the ratio for [Reduce/Enlarge] to

decrease the data size, or split the data to send it
separately.

016-791

O [Cause] Failed to access to the destination computer or the save

location for Network Scanning.

[Remedy] Check the directory configuration and files on the server,

the access privileges for the destination or the location,
and check if you are authorized to access the specified
destination computer or server.

016-792

O [Cause] Failed to get the job history report specified in [Job

Counter Report].

[Remedy] The specified job history does not exist.

016-793

O [Cause] Free space is insufficient on the hard disk.

[Remedy] Either remove unnecessary data from the hard disk to

increase free disk space, or initialize the hard disk.

016-798

[Cause] Unable to print the document because a HDD Extension

Kit is unattached.

[Remedy] Attach a HDD Extension Kit, and print again.

016-799

[Cause] An invalid print parameter is included.
[Remedy] Check the print data and options, and print again.

018-500

O [Cause] Unable to connect to the SSL server because the server

certificate and the private key do not exist.

[Remedy] Set the server certificate. Or, set the CA feature to [Off].

Error Code

Category

Cause and Remedy

C P F S M O

* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is

printed on the label or card attached on the machine.

Summary of Contents for DocuCentre-III C4100











































































































































































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-III C4100

Reviews:

Related manuals for DocuCentre-III C4100

Brands by name

Popular brands

Xerox DocuCentre-III C4100, Manual

Search results

Summary of Contents for DocuCentre-III C4100

Reviews:

Related manuals for DocuCentre-III C4100

Brands by name

Popular brands