5 Tools
136
T
ools
5
EtherTalk
Port Status
Select [Enabled] to use EtherTalk.
Bonjour
Port Status
Select [Enabled] to use Bonjour.
Note
•
Bonjour can be set only when optional Adobe PostScript 3 Kit is installed.
•
In order to print from a printer detected by [Bonjour], the LPD port must be activated in
advance.
Port9100
Port Status
Select [Enabled] to use Port9100.
Select this option when the communication protocol is in RAW format for Windows Standard
TCP/IP port monitor.
Port9100 - Port Number
Select [Standard (9100)] or [Enter Number].
Enter a port number in the range from 1 to 65535 when selecting [Enter Number].
The default value is 9100.
Important •
Do not use the numbers assigned to the other ports.
SNMP
Port Status
Select [Enabled] to use SNMP, when you use any Fuji Xerox manufactured web applications
to remote control the machine.
FTP Client
Port Status
Select [Enabled] when you use Scan to PC feature with FTP transmission.
Receive E-mail
Port Status
Select [Enabled] when you use E-mail Printing.
Send E-mail
Port Status
Select [Enabled] when you use E-mail feature.
E-mail Notification Service
Port Status
Select [Enabled] when you use the mail notice or job completion notice feature.
Note
•
[Consumables Status], [Parts Status], [Paper Tray Status], [Output Tray Status],
[Jam Status], [Interlock Status], and [Fault Status] are notified.
•
You can configure the notification service in CentreWare Internet Services. For more
information, refer to the help of CentreWare Internet Services.
UPnP Discovery
Port Status
Select [Enabled] to use UPnP.