Accounting
201
T
ools
5
Fax Billing Data
You can make settings for the fax billing.
Important •
In order to register the billing data, enable the fax feature for the Accounting prior to the
operations. For details on how to enable the fax feature, refer to "Service Access" (P.203).
Note
•
Set the communications time per unit charge in each time band (daytime/night/midnight) in
[Billing]. For information on how to set [Billing], refer to "Billing - Day Time, Billing - Night
Time, Billing - Midnight" (P.191).
•
The registered details can be confirmed by printing the [Billing Data List]. For information
about how to print, refer to "Billing Data List" (P.80).
1
Enter the System Administration
mode.
For details on how to enter the System
Administration mode, refer to "System
Settings Procedure" (P.92).
2
Select [Fax Billing Data] and select
[Change Rate per Unit].
Charge Rate per Unit
This is a communication charge per unit.
3
Select [Change Settings].
4
Enter an amount using the
keyboard displayed on the screen
or the numeric keypad.
5
Select [Save].
