Replacing Consumables
59
M
ai
n
te
na
nc
e
3
3
Hold the tabs on both sides of a
new staple cartridge, and insert it
into the original position until it
clicks.
Note
•
If you have trouble inserting
the cartridge, make sure that
the staples in the cartridge are
properly in place.
4
Repeat steps 2 and 3 to replace
the other staple cartridge.
5
Close the side cover of the finisher.
Note
•
If the side cover of the finisher is not completely closed, a message will appear and the
machine will not operate.
Emptying the Punch Waste Container (for Finisher-B1)
When the hole punch waste container becomes full, a message appears on the touch
screen. When the message is displayed, empty the hole punch waste container as
instructed.
Make sure to discard all paper chads when emptying the hole punch waste container.
If you do not empty the container completely, the container becomes full before the
message stating to empty the container appears again, and this can cause a
breakdown of the machine.
Important •
Make sure you empty the hole punch waste container when the power is on. If you empty
the container when the power is off, the machine will not recognize that the container has
been emptied.
1
Make sure that the machine is not
operating, and lift the top cover and
open the front transport cover of
the finisher.
2
Pull out the hole punch waste
container.
