WAGO-I/O-SYSTEM 750
System Description
27
750-806 Fieldbus Controller DeviceNet
TM
Manual
Version 2.0.0
3.5.3.2
Fusing
Internal fusing of the field supply is possible for various field voltages via an
appropriate power supply module.
Table 6: Power Supply Modules
Order No.
Field Voltage
750-601
24 V DC, Supply/Fuse
750-609
230 V AC, Supply/Fuse
750-615
120 V AC, Supply/Fuse
750-617
24 V AC, Supply/Fuse
750-610
24 V DC, Supply/Fuse/Diagnosis
750-611
230 V AC, Supply/Fuse/Diagnosis
750-606
Supply Module 24 V DC, 1,0 A, Ex i
750-625/000-001 Supply Module 24 V DC, 1,0 A, Ex i (without diagnostics)
Figure 7: Supply Module with Fuse Carrier (Example 750-610)
Observe the maximum power dissipation and, if required, UL requirements!
In the case of power supply modules with fuse holders, you must only use fuses
with a maximum dissipation of 1.6 W (IEC 127).
For UL approved systems only use UL approved fuses.
In order to insert or change a fuse, or to switch off the voltage in succeeding I/O
modules, the fuse holder may be pulled out. In order to do this, use a screwdriver
