WAGO 750-806, Manual

Page: 149 / 214

WAGO-I/O-SYSTEM 750 Fieldbus Communication 149
750-806 Fieldbus Controller DeviceNet
TM
Manual
Version 2.0.0
Instance 3 (Bit-Strobe I/O Connection)
Table 89: Instance 3
Attributes
ID Utilization
in Device Access
Rights Name Data Type Description
1 Available get state USINT Object state
2 required get instance_
type USINT Displays I/O or messaging
connection
3 required get transportC
lass_
trigger USINT Defines the connection behavior
4 required get produced_
connection_
id UINT In the CAN identifier field when
transmitting
5 required get consumed_
co
nnection_
id UINT CAN identifier field value that
denotes the message that should
be transmitted
6 required get initial_
comm
_characteri
stics USINT Defines the message groups
across which productions and
consumptions associated with this
connection occur
7 required get produced_
con
nection_
size UINT Maximum number of bytes that
can be transmitted via the
connection
8 required get consumed_
co
nnection_
size UINT Maximum number of bytes that
can be received via the
connection
9 required get/set expected_
pa
cket_rate UINT Defines the timing of the
connection
10, 11 N/A get N/A N/A not used
12 required get watchdog_
timeo
ut_action USINT Defines how to handle inactivity /
watchdog
timeouts
13 required get produced_
con
nection_
path_
length UINT Number of bytes in
“produced_connection_path”
attribute
14 required get produced_
con
nection_
path Array of
USINT Specifies application objects,
whose data are generated in this
connection object
15 required get consumed_
co
nnection_
path_
length UINT Number of bytes in
“consumed_connection_path”
attribute
16 required get consumed_
co
nnection_
path Array of
USINT Specifies application objects,
whose data are received by this
connection object