WAGO-I/O-SYSTEM 750
Fieldbus Communication 135
750-806 Fieldbus Controller DeviceNet
TM
Manual
Version 2.0.0
11.1.5
Configuration and Parameterization Using the Object Model
11.1.5.1 EDS Files
Features of DeviceNet
TM
devices are documented by the manufacturers in the
form of EDS files (“Electronic Data Sheet”) and made available to the user.
Structure, content and coding of the EDS files are standardized, allowing
configuration via configuration devices from various manufacturers.
EDS file for fieldbus controller 750-806
750-806_1.EDS*
*
“_1” indicates that this EDS file is valid for fieldbus controllers with firmware major version 1.
The ESD file is read by the configuration software. Corresponding settings are
transmitted.
Additional Information
Refer to the software user manuals for the important entries and handling steps for
settings in the configuration.
Additional Information
The “Open DeviceNet Vendor Association” (ODVA) provides information about
the EDS files for all listed manufacturers.
EDS and symbol files to configure the I/O modules are available under order
number 750-912 on the Internet at:
11.1.5.2 Object Model
For network communication, DeviceNet
TM
utilizes an object model in which all
functions and data of a device are described.
General Management Objects
(“System Support Objects”)
•
“Identity Object”
•
“Message Router Object”
Communication Objects for Data Exchange
(“Communication Objects”)
•
“DeviceNet Object”
•
“Connection Object”
