22
System Description
WAGO-I/O-SYSTEM 750
750-806 Fieldbus Controller DeviceNet
TM
Manual
Version 2.0.0
Figure 5: System Voltage for Standard Couplers/Controllers and Extended ECO Couplers
Only reset the system simultaneously for all supply modules!
Reset the system by simultaneously switching the system supply at all supply
modules (fieldbus coupler/controller and potential supply module with bus power
supply) off and on again.
3.5.2.2
Dimensioning
Recommendation
A stable power supply cannot always be assumed. Therefore, you should use
regulated power supplies to ensure the quality of the supply voltage.
The supply capacity of the fieldbus coupler/controller or the internal system
supply module can be taken from the technical data of the components.
Table 4: Alignment
Internal current
consumption
*)
Current consumption via system voltage (5 V for electronics
of I/O modules and fieldbus coupler/controller).
Total current
for I/O modules
*)
Available current for the I/O modules. Provided by the bus
power supply unit. See fieldbus coupler/controller and
internal system supply module
*)
See current catalog, manuals, Internet
