Vertical Comdial DX-80 Technical Manual Download Page 52

Page: 52 / 322

ETTING

TARTED

> S

HORTCUTS

ELP

ORK

ASTER

DX-80 Programming Manual

- 52 -

4. In the same manner, enter any other extension pickup numbers as needed. When you are finished copying

the setups, press

Esc

. The system then performs the extension group copy that you specified, and returns

you to the System Application — Extension Copy Group menu.

5. If needed, you can enter another source extension directory number to copy from, and continue the process

for other pickup groups.

6. When you are done, press

Esc

to return to the Database Programming screen. The system prompts: “Exit

This Feature?”; press

for yes.

7. The system prompts “Save Current Setting?” Press

to save your changes.

8. The system then prompts “File Exists, Override?” Press

to continue with the save operation.

9. Press

Esc

to return to the Database Programming menu.

10. When you have finished all programming changes, perform a Send operation to copy your new database to

the DX-80 switch system memory. For more details, see Section 2.1.4.4,

F4 – Send

Summary of Contents for Comdial DX-80


































































































































































































































































































































Search results

Summary of Contents for Comdial DX-80

Reviews:

Related manuals for Comdial DX-80

Brands by name

Popular brands

Vertical Comdial DX-80, Technical Manual

Search results

Summary of Contents for Comdial DX-80

Reviews:

Related manuals for Comdial DX-80

Brands by name

Popular brands