Vertical Comdial DX-80, Technical Manual

Page: 157 / 322

- 157 -
DX-80 Programming Manual
P
ROGRAMMING
C
ALL
H
ANDLING
> S
ETTING
U
P
T
RANSFER
R
ECALLS FOR
I
DLE
The following conditions apply to setting the transfer recall time.
• Extension users can transfer CO line calls and intercom calls.
• The system places transferred CO lines that recall on system hold.
• When transferring CO line recalls, the system displays the line number and extension number from where the
call was transferred.
• The transferred party will hear ring-back tone while the call is transfer ringing.
• In a screened transfer, if the destination extension answers the intercom call in voice announce hands-free
mode and does not go off hook, the system rings the destination extension.
• In screened transfer, if the destination extension answers the intercom call by lifting the handset, the system
immediately connects the caller to the destination extension.
• The system does not direct recalls to the programmed Alternate Attendant extension.
Other features whose programming may be affected by transfer recall time include the following.
• Transfer and Answer Call
• Recall
• Call Forward
• Forced Intercom Tone Ring
• Call Park / Call Park Answer
6.10.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The system displays the DB Item Select screen.
3. Enter 03-10 , then press save. This advances you to the Transfer-Idle Recall programming screen.
4. Press chg to select how long you want the system to ring the idle extension before pulling the call back.
Valid options include 16, 30, 60, 90, and 120 seconds. The default is 30 seconds.
5. Press next to advance to the next data item.
6. Enter 03-11 , then press save . This advances you to the Transfer-Busy Recall programming screen.
7. Press chg to select how long you want the system to ring the busy extension before pulling the call back.
Valid options include 16, 30, 60, 90, and 120 seconds. The default is 60 seconds.
8. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.