Vertical Comdial DX-80 Technical Manual Download Page 162

Page: 162 / 322

ROGRAMMING

ALL

ANDLING

> S

ETTING

IAL

AIT

IME

AND

IAL

ELAY

DX-80 Programming Manual

- 162 -

4. Highlight

Dial Wait Time

and press

Enter

to specify how long you want the system to wait before outputting

DTMF tones. Valid choices are 0 - 8 seconds. The default is 0 seconds.

5. When you are done, press

Esc

to return to the Call Handling menu. The system prompts: “Exit This Fea-

ture?”; press

for yes.

6. The system prompts “Save Current Setting?” Press

to save your changes.

7. The system then prompts “File Exists, Override?” Press

to continue with the save operation.

8. Press

Esc

to return to the Call Handling menu.

9. Next, specify the dial delay. Highlight

Category 3

and press

Enter

. The system displays the Call Han-

dling—Category 3 screen.

10. Highlight

Dial Delay Time

and press

Enter

to specify the delay before the system presents dial tone to the

extension user. Valid choices are 100, 300, 1000, 1500, and 2000 milliseconds. The default is 100 millisec-
onds.

11. When you are done, press

Esc

to return to the Database Programming screen. The system prompts: “Exit

This Feature?”; press

for yes.

12. The system prompts “Save Current Setting?” Press

to save your changes.

13. The system then prompts “File Exists, Override?” Press

to continue with the save operation.

14. Press

Esc

to return to the Database Programming menu.

15. When you have finished all programming changes, perform a Send operation to copy your new database to

the DX-80 switch system memory. For more details, see Section 2.1.4.4,

F4 – Send

Summary of Contents for Comdial DX-80


































































































































































































































































































































Search results

Summary of Contents for Comdial DX-80

Reviews:

Related manuals for Comdial DX-80

Brands by name

Popular brands

Vertical Comdial DX-80, Technical Manual

Search results

Summary of Contents for Comdial DX-80

Reviews:

Related manuals for Comdial DX-80

Brands by name

Popular brands