Vertical Comdial DX-80, Technical Manual

Page: 186 / 322

P
ROGRAMMING
C
ALL
H
ANDLING
> P
ROGRAMMING
T
ENANT
G
ROUPS
DX-80 Programming Manual
- 186 -
8. Highlight the Area Code field for the first item in the local calling area and press Enter . Key in the first
local area code for the customer’s site, and press Enter . The range is from 0 to 999. The default is NULL
(none).
9. Highlight the Area Prefix field for the first item in the local calling area and press Enter . Key in the code
you want the system to dial (if any) when dialing local calls, and press Enter . Use this field when 10 digit
dialing is required on local calls. The range is from 0 to 999. The default is NULL (none).
10. In the same manner, specify additional local area codes and prefixes as needed. While many local calling
areas only include one area code and prefix, some local calling areas contain several. If you need to specify
more than one local calling area code and prefix, use lines 2 through 8 to do so. If you do not need multiple
local area codes/prefixes, leave lines 2 through 8 set to NULL.
11. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
12. The system prompts “Save Current Setting?” Press Y to save your changes.
13. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
14. Press Esc to return to the Database Programming menu.
15. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
6.26 Programming Tenant Groups
Tenant Groups allow you to separate system resources so the DX-80 system can operate as two or three inde-
pendent systems deployed at a single site.
You can completely isolate extension functions depending on how you assign the tenant groups; i.e., you can pro-
hibit calling from one tenant group to another. You do not have to isolate extensions to be able to isolate system
resources, however. (See Section 5.6,
Setting the CO Line Type , Section 5.9, Assigning Ring Type for the CO Line ,
and Section 5.10, Setting the Answer Position for Day and Evening for details on how to isolate system resources
without invoking full isolated tenant operations).