Vertical Comdial DX-80 Technical Manual Download Page 113

Page: 113 / 322

- 113 -

DX-80 Programming Manual

ROGRAMMING

CO L

INES

> A

SSIGNING

THE

ENANT

ROUP

The following conditions apply when assigning the CO line to a tenant group.

• The DX-80 system provides up to three tenant groups.

• When tenant calling is restricted from one tenant group to another tenant group, intercom calls, call transfers

and recalling operations will not operate across these designations.

• Extension directory numbers remain unique to system ports and are not duplicated for each tenant group.

(Although extension dialing may be restricted across tenant group barriers.)

5.2.1 PROGRAMMING USING THE DET

Note:

chg

bksp

save

one

always

del

, and

ack

are interactive LCD button operations. Use the three buttons

below the LCD display to actuate the associated operation.

1. Enter Database Administration using the feature code

Feature # *

and then enter the DB Admin password.

2. Press

show

. The system displays the DB Item Select screen.

3. Enter

02-740~755-02

and press

save

. This advances you to the Tenant Group selection for the CO line you

specified.

4. Press

chg

until the tenant group you want to use for this CO line displays.

5. Press the

Hold

button to enter a new CO line to program.

6. Press the

Hold

button to return to the previous menu level,

Or, press the

Volume

button (up or down) to return to the DB Item Selection screen,

Or, exit programming.

5.2.2 PROGRAMMING USING PC-DBA

1. Select

Programming

from the PC-DBA menu and press

Enter

. The system displays the Database Program-

ming menu.

2. Use the arrow keys to highlight

CO Line

and press

Enter

. The system displays the CO Line menu.

3. Highlight

Category 1

and press

Enter

. The system displays the CO Line - Category 1 menu.

4. Use the arrow keys and

Page Up

and

Page Down

to highlight the

Tenant Group

field for the CO line you

want to program. Then press

Enter

to toggle through the available tenant group numbers 1, 2, or 3.

Summary of Contents for Comdial DX-80


































































































































































































































































































































Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands

Vertical Comdial DX-80, Technical Manual

Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands