Vertical Comdial DX-80 Technical Manual Download Page 175

Page: 175 / 322

- 175 -

DX-80 Programming Manual

ROGRAMMING

ALL

ANDLING

> S

ETTING

LARM

LAY

NTERVALS

The following conditions apply to setting the alarm interval.

• The display remains unchanged until

ack

is pressed or until the telephone is used for another call.

• You can program the Alarm Clock feature code at any programmable flexible feature button.

6.19.1 PROGRAMMING USING THE DET

1. Enter Database Administration using the feature code

Feature # *

and then enter the DB Admin password

2. Press

show

. The DB Item Select screen displays.

3. Enter

03-19

and press

save

4. Press

chg

to select the time you want the system to repeat the alert tone when the set alarm time is reached.

Valid options are 10 - 600 seconds, in 10 second intervals (10, 20, 30, etc.). The default is 30 seconds.

5. Press

back

next

to continue programming. Or exit programming.

6.19.2 PROGRAMMING USING PC-DBA

1. Select

Programming

from the PC-DBA menu and press

Enter

. The system displays the Database Program-

ming menu.

2. Use the arrow keys to highlight

Call Handling

and press

Enter

. The system displays the Call Handling

menu.

3. Highlight

Category 3

and press

Enter

. The system displays the Call Handling—Category 3 menu.

4. Highlight

Extension Alarm Play Time

, then press

Enter

select the time you want the system to repeat the

alert tone when the set alarm time is reached. Valid options are 10 - 600 seconds, in 10 second intervals (10,
20, 30, etc.). The default is 30 seconds.

5. When you are done, press

Esc

to return to the Database Programming screen. The system prompts: “Exit

This Feature?”; press

for yes.

6. The system prompts “Save Current Setting?” Press

to save your changes.

7. The system then prompts “File Exists, Override?” Press

to continue with the save operation.

8. Press

Esc

to return to the Database Programming menu.

Summary of Contents for Comdial DX-80


































































































































































































































































































































Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands

Vertical Comdial DX-80, Technical Manual

Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands