Vertical Comdial DX-80, Technical Manual

Page: 51 / 322

- 51 -
DX-80 Programming Manual
G
ETTING
S
TARTED
> S
HORTCUTS TO
H
ELP
Y
OU
W
ORK
F
ASTER
3. Once you enter a valid extension number, the system moves you to the Destination DIR No. field. Enter the
extension directory number you want to copy the baseline’s programming into (any valid extension number)
and press
Enter . Once you enter a valid extension number, the system accepts that number and scrolls down
a line to allow you to enter another extension number into which you want to copy the baseline’s program-
ming.
Note : If you enter an invalid number, the system erases your input.
4. In the same manner, enter any other extension numbers as needed. When you are finished copying the set-
ups, press Esc . The system then performs the extension copy that you specified, and returns you to the Sys-
tem Application — Extension Copy Individual menu.
5. If needed, you can enter another source extension directory number to copy from, and continue the process
for other extensions.
6. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
7. The system prompts “Save Current Setting?” Press Y to save your changes.
8. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
9. Press Esc to return to the Database Programming menu.
10. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
To copy a extension setup to all the extensions in a pickup group, perform the following steps.
1. Highlight Group and press Enter . The system displays the System Application — Extension Copy Group
menu.
2. The system places the cursor in the Source DIR No . field. Key in the extension directory number you want
to use as a baseline, and press Enter . You can use any valid extension number in the system. There is no
default.
3. Once you enter a valid extension number, the system moves you to the Destination DIR No. field. Enter the
extension pickup directory number you want to copy the baseline’s programming into (any valid pickup
directory number) and press
Enter . Once you enter a valid pickup number, the system accepts that number
and scrolls down a line to allow you to enter another pickup number into which you want to copy the base-
line’s programming.
Note : If you enter an invalid number, the system erases your input.