Vertical Comdial DX-80, Technical Manual

Page: 206 / 322

P
ROGRAMMING
C
ALL
H
ANDLING
> P
ROGRAMMING
A
UTO
A
TTENDANT
M
ODULE
(AAM)
DX-80 Programming Manual
- 206 -
12. Press chg to enter a new destination for the Day Mode for this tenant group. Enter the appropriate DX-80
system directory number (extension, UCD group, or virtual number) where you want the system to route
callers when they cannot be routed automatically, and press
save . The default is extension 101.
13. Press next . The system displays the current ALT (alternate) Mode - Answer Position for the tenant group
you specified.
14. Press chg to enter a new destination for the ALT Mode for this tenant group. Enter the appropriate DX-80
system directory number (extension, UCD group, Virtual Number) where you want the system to route call-
ers when they cannot be routed automatically, and press
save . The default is extension 101.
15. Press next . The system displays the current EVE (evening) Mode - Answer Position for the tenant group
you specified. Press chg to enter a new destination for the evening mode for this tenant group. Enter the
appropriate DX-80 system directory number (extension, UCD group, Virtual Number) where you want the
system to route callers when they cannot be routed automatically, and press
save . The default is extension
101.
16. Press next . The DX-80 system prompts you for changes to another tenant group.
17. In the same manner, program other tenant groups as needed.
18. When you are done, press next to return to the previous programming level (Answer Position).
19. Press next . The system displays the Auto Attendant Line field. Notice that the display prompts you for the
CO line directory number.
20. Enter the CO line directory number (740-755) you want to use with the automated attendant, and press
show . The system displays the Auto_A Line field.
21. Press chg to change this value. If you the automated attendant to answer this CO line, set this field to Y
(yes). If you do not want the AA to answer this CO line, set this field to no. Press chg to toggle from Y to
N.
22. Press next . The system displays the Service field.
23. Press chg to select when you want the AA to answer this CO line. Valid options are ALWAYS, NEVER,
DAY, and EVE.
24. Press next . The system prompts for the next CO line you want to program for automated attendant answer-
ing. You may continue programming other CO lines for automated attendant use or exit the programming
mode.