manualshive.com logo in svg

Vertical Comdial DX-80, Technical Manual

Share
Download
Vertical Comdial DX-80 Technical Manual Download Page 176

P

ROGRAMMING

 C

ALL

 H

ANDLING

 > E

NABLING

/D

ISABLING

 H

OTEL

 F

EATURE

DX-80 Programming Manual

- 176 -

9. When you have finished all programming changes, perform a Send operation to copy your new database to 

the DX-80 switch system memory.  For more details, see Section 2.1.4.4, 

F4 – Send

.

6.20 Enabling/Disabling Hotel Feature

This feature allows the system attendant to administer certain system extension features to emulate hotel opera-
tions.  The system attendant can:

•  Set extension wakeup calls via the Alarm Clock-Extension feature.

•  Set extension status to Checked IN/Checked OUT/Clean such that the associated LED of DSS/BLF buttons 

for the extension indicate the current status.  In “Checked Out” and “Clean” modes, dialing at the extension is 
restricted to intercom calls only.

You can enable the Hotel Mode while programming the system.  

You must set Hotel Enable to 

Y

 (yes) for these features to operate.

If you have programmed a release key, you can use it to clear any active condition (extension alarm clock mode, 
etc.) with one touch.

6.20.1  PROGRAMMING USING THE DET

Note: 

chg

, 

bksp

, 

save

, 

one

, 

always

, 

del

, and 

ack

 are interactive LCD button operations.  Use the three buttons 

below the LCD display to actuate the associated operation.

1. Enter Database Administration using the feature code 

Feature # *

 and then enter the DB Admin password.

2. Press 

show

.  The system displays the DB Item Select screen.

3. Enter 

03-20

, then press 

save

.  This advances you to the Hotel Enable programming screen.

4. Press 

chg

 to select yes (on) or no (off).  The default is no.

5. Press the 

Hold

 button to return to the previous menu level, 

Or, press the 

Volume

 button (up or down) to return to the DB Item Selection screen, 

Or, exit programming.

6.20.2  PROGRAMMING USING PC-DBA

1. Select 

Programming

 from the PC-DBA menu and press 

Enter

.  The system displays the Database Program-

ming menu.

2. Use the arrow keys to highlight 

Call Handling

 and press 

Enter

.  The system displays the Call Handling 

menu.

3. Highlight 

Category 3

 and press 

Enter

.  The system displays the Call Handling—Category 3  menu.

Summary of Contents for Comdial DX-80



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands