Vertical Comdial DX-80 Technical Manual Download Page 88

Page: 88 / 322

ROGRAMMING

YSTEM

EATURES

> A

SSIGNING

THE

DSS P

ORT

WNER

DX-80 Programming Manual

- 88 -

4. Highlight the

DIR No.

field for DSS Unit 1 and press

Enter

. Key in the directory number of the digital port

to which the DSS Console is connected, and press

Enter

. Valid port directory numbers include any avail-

able, non-conflicting port directory number. The default is NULL.

5. Highlight the

DSS Owner

field for DSS Unit 1 and press

Enter.

Key in the number of the extension with

which this DSS will operate, and press

Enter

. Valid extension numbers include any available, non-conflict-

ing extension number. The default is NULL.

6. In the same manner, assign DSS port numbers and extension numbers for the remaining DSS units as

needed.

7. When you are done, press

Esc

to return to the Database Programming screen. The system prompts: “Exit

This Feature?”; press

for yes.

8. The system prompts “Save Current Setting?” Press

to save your changes.

9. The system then prompts “File Exists, Override?” Press

to continue with the save operation.

10. Press

Esc

to return to the Database Programming menu.

11. When you have finished all programming changes, perform a Send operation to copy your new database to

the DX-80 switch system memory. For more details, see Section 2.1.4.4,

F4 – Send

Summary of Contents for Comdial DX-80


































































































































































































































































































































Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands

Vertical Comdial DX-80, Technical Manual

Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands