Vertical Comdial DX-80 Technical Manual Download Page 240

Page: 240 / 322

ROGRAMMING

OICE

AIL

> P

ROGRAMMING

HIRD

ARTY

VM, A

NALOG

ORTS

DX-80 Programming Manual

- 240 -

3. Highlight

Members

, then press

Enter

. The system displays the member list for hunt group 24.

4. Enter the extension number of the analog port you want to program as this member of the VM UCD group

and press

Enter

5. In the same manner, continue programming all analog extensions connected to the voice mail.

6. When you are done, press

Esc

to return to the Uniform Call Distribution — Parameter Processing: Hunt

Group 24 screen. The system prompts: “Exit This Feature?”; press

for yes.

7. The system prompts “Save Current Setting?” Press

to save your changes.

8. The system then prompts “File Exists, Override?” Press

to continue with the save operation.

9. Press

Esc

to return to the Uniform Call Distribution — Parameter Processing: Hunt Group 24 menu. Press

Esc

twice more to return to the Extension Application menu.

Next, program the voice mail hunt group and call handling digits.

Summary of Contents for Comdial DX-80


































































































































































































































































































































Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands

Vertical Comdial DX-80, Technical Manual

Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands