Vertical Comdial DX-80, Technical Manual

Page: 61 / 322

- 61 -
DX-80 Programming Manual
P
ROGRAMMING
S
YSTEM
F
EATURES
> A
SSIGNING
A
TTENDANTS
3. Enter the existing password and press Enter . Note : The default PC-DBA password when the system is
shipped is “ “ (eight spaces).
4. After you enter the eighth digit of the old password, the system prompts you to enter the new password.
New Password:
Key in the eight alphanumeric characters you want to use for your new password.
5. After you enter the eighth character of the new password, the system asks you to confirm the new password.
Confirm:
Key in the same eight alphanumeric characters you entered in the previous step.
6. After you confirm the eighth character of the new password, the system asks if you want to send the new
password to the switch to be saved.
Save New DB PSWD to KSU? (Y/N)
7. Press Y to save your new password. The system responds as follows.
Password Change Succeed!!
4.2 Assigning Attendants
You assign a primary attendant to each of the DX-80 system’s three tenant groups. The standard Digital Speaker-
phone serves as the attendant telephone. When assigned as attendant, this extension supports general system func-
tions like line recall, forced incoming ICM call forward, and manual evening or alternate service mode operation.
The attendant receives all intercom calls directed to the attendant directory number (“0” at default). The attendant
extension has an internal call queue that allows multiple intercom calls to be directed to the attendant at the same
time.
You can designate an alternate attendant position in each tenant group for common sharing of incoming CO line
calls or load sharing during peak traffic periods.
The attendant’s extension password provides control of: