Vertical Comdial DX-80, Technical Manual

Page: 216 / 322

P
ROGRAMMING
T
OLL
R
ESTRICTIONS
> C
LASS OF
S
ERVICE AND
D
IGIT
I
NTERVALS
DX-80 Programming Manual
- 216 -
• Callers can override an extension’s class of service if you set up an account code password that instructs the
system to use a different class of service for the call. See Section 7.2, Account Code Length and Password .
• You can set a system speed dial to override toll restriction. For example, suppose your customer has a branch
office out of state where they want to allow the corporate extension users to call, while still prohibiting all
other toll calls. In this case, you can set up a system speed dial to allow calls to the branch office.
Note : It
must be a system speed dial, as the system checks the toll restrictions for individual speed dial numbers and
abides by them. System speed dial numbers override toll restrictions as long as you have System Speed Toll
Check enabled. For more details on speed dial numbers, see Section 4.8, Programming Speed Dial Numbers.
7.1.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The system displays the DB Item Select screen.
3. First, program the toll restrictions and assign the extension/CO line COS to the restrictions. Enter 05-01-
1~3-001~100 (where 1~3 is the tenant group and 001~100 is the restriction number you want to program).
Then press save . This advances you to the “FROM” column of the tenant group and restriction you speci-
fied.
Press chg to change the start of this interval range ( FROM ). Enter the first number in the range of digits you
want to allow and press save . Valid options include digits 0-9 and # (all). For example, if you want to
restrict long distance and operator calls, enter 2 in this field. This way, the system does not allow 0 and 1 as
possible digits in the first position of the dial string.
The default is 0. If you want to allow all long distance and operator calls in this toll restriction, enter 0 in
this field.
4. Press next to advance to the TO column of the tenant group and interval you specified. Press chg to change
the end of this interval range. Enter the last number in the range of digits you want to allow and press save .
Valid options include digits 0-9 and # (all). The default is #, which allows all digits following the FROM
digit.
5. Press next to advance to extension or CO line COS you want to set.
6. Next, assign the toll restrictions by which the class of services to abide. You have two options for restricting
calls: you can restrict calls on a per-extension basis (extension class of service) or on a per-CO line basis
(CO line class of service).
7. Press show . The DAY Allowed parameter displays for the extension or CO line COS.
8. Press next to advance to the EVE Allowed COS for the extension or CO line COS.
Or…
Press show to program COS allowed settings for this toll restriction. COS 0 displays.
9. Press next and back until the COS you want to change displays. Then press chg to set the toll restriction on
(Y) for this class of service, or off (N) for this class of service.