Vertical Comdial DX-80, Technical Manual

Page: 33 / 322

- 33 -
DX-80 Programming Manual
P
ROGRAMMING
O
PTIONS
> U
SING
PC-D
ATABASE
A
DMINISTRATION
(PC-DBA)
+------------------------------------------------------------+
¦ ¦
¦ Do you want to backup data files ? (Y/N) ¦
¦Backup to : C:\DX-80 ¦
¦ ¦
+------------------------------------------------------------+
3. Enter a new directory (DOS file system directory) where you want to store these files. You can also specify
the “A” drive if you want to sore the files on a floppy disk. Regardless of where the files are to be stored,
remember the location so you can retrieve them at the appropriate time.
4. After you enter the drive/directory name, press Enter . If it is a new directory the following alert displays.
Directory Not Exist! Create it ? (Y/N)
5. Press Y . The files are copied to the location specified and the following message displays to confirm the pro-
cedure:
Backup Completed, Press Any Key To Exit
6. Press any key. Your database save is now complete.
2.1.3.2 Performing a Restore
To perform a database restore, follow these steps.
1. Go to the Main menu.
2. Use the arrow keys to highlight Database Restore , then press Enter . The system prompts you to enter the
destination for the restored database.
3. Enter the directory/drive data and press Y . The system asks you to confirm the action, “Replace Files in Cur-
rent Directory? (Y/N).”