Vertical Comdial DX-80, Technical Manual

Page: 107 / 322

- 107 -
DX-80 Programming Manual
P
ROGRAMMING
S
YSTEM
F
EATURES
> C
USTOMIZING THE
N
UMBERING
P
LAN
2. Highlight Length 1 and press Enter to specify the number of digits in the directory number you want to
assign to CO line group 1. The valid choices are 1-4. The default is 3.
3. Highlight Leading and press Enter . Key in the digits you want to use for accessing CO line 1. Valid entries
are 0 to 9999. The default is 9.
4. In the same manner, assign the lengths and directory numbers and for CO line groups 2 through 5 as needed.
5. When you are done, press Esc to return to the System Application menu. The system prompts: “Exit This
Feature?”; press Y for yes.
6. The system prompts “Save Current Setting?” Press Y to save your changes.
7. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
8. Press Esc to return to the System Application menu.
4.20.2.2 Numbering Plan 2
The second page of the numbering plan allows you to specify the amount of digits in the DX-80 extensions, and
whether any leading digits are required.
1. Highlight Numbering Plan 2 on the System Application menu and press Enter. The system displays the
System Application—Numbering Plan 2 screen.