Vertical Comdial DX-80 Technical Manual Download Page 252

Page: 252 / 322

ROGRAMMING

XTENSIONS

> A

SSIGNING

ASSWORD

THE

XTENSION

DX-80 Programming Manual

- 252 -

4. Highlight the

Password

field for directory number you want to program and press

Enter

Note

: You may

have to use the Page Down key find the directory number if it is on the second page of this menu.

5. Enter the password you want to use. Valid passwords use any digit, up to the extension length. The default

is all zeros (0000 for 4 digit passwords, 00000 for 5 digit passwords, etc.).

6. In the same manner, program other extension passwords as needed.

7. When you are done, press

Esc

to return to the Database Programming screen. The system prompts: “Exit

This Feature?”; press

for yes.

8. The system prompts “Save Current Setting?” Press

to save your changes.

9. The system then prompts “File Exists, Override?” Press

to continue with the save operation.

10. Press

Esc

to return to the Database Programming menu.

11. When you have finished all programming changes, perform a Send operation to copy your new database to

the DX-80 switch system memory. For more details, see Section 2.1.4.4,

F4 – Send

Summary of Contents for Comdial DX-80


































































































































































































































































































































Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands

Vertical Comdial DX-80, Technical Manual

Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands