Vertical Comdial DX-80, Technical Manual

Page: 151 / 322

- 151 -
DX-80 Programming Manual
P
ROGRAMMING
C
ALL
H
ANDLING
> S
ETTING
U
P
H
OLD
R
EMIND
9. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send
6.7 Setting Up Hold Remind
The system provides a programmable timer to remind you that a call has been left on system or exclusive hold.
When enabled, the system sounds one ring tone repeated each time the selected hold time expires. The following
conditions apply:
• Hold Reminder applies to CO line calls that are on System Hold or Exclusive Hold.
• Hold Reminder applies to both intercom and CO line calls.
6.7.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The system displays the DB Item Select screen.
3. Enter 03-07 , then press save . Press chg to specify how often you want the system to sound the reminder
tone for calls on system hold or exclusive hold. Valid choices are 0, 10, 30, 60, and 90 seconds. The default
is 30 seconds. If you want to disable the hold reminder tone, select 0.
4. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.
6.7.2 PROGRAMMING USING PC-DBA
1. Select Programming from the PC-DBA menu and press Enter . The system displays the Database Program-
ming menu.
2. Use the arrow keys to highlight Call Handling and press Enter . The system displays the Call Handling
menu.
3. Highlight Category 1 and press Enter . The system displays the Call Handling—Category 1 menu.