manualshive.com logo in svg

Vertical Comdial DX-80, Technical Manual

Share
Download
Vertical Comdial DX-80 Technical Manual Download Page 29

- 29 -

2.  PROGRAMMING OPTIONS

There are two programming interfaces you can use to program the DX-80:

•  PC-DBA

•  Digital Extension Telephone (DET).

2.1  Using PC-Database Administration (PC-DBA)

The DX-80 system allows you to administer system database parameters using any IBM

®

 compatible Personal 

Computer (PC).  

The use of a PC has distinct advantages over programming the system using the digital telephone, including: 

•  specific database archiving (via save function), 

•  remote programming, and  

•  outboard programming (programming the system template in the PC memory, then downloading it to the 

DX-80 switch memory when ready). 

The PC program that interfaces with the DX-80 system is called PC-Database Administration (PC-DBA).

PC-DBA requires the following resources in the PC environment:

•  PC running DOS.  

Note:  While you can run PC-DBA in a DOS Window, performance can be impacted by 

other Windows modules.  Vertical Communications, Inc. does not guarantee or provide warranty for any 
level of performance in the Windows environment.

•  640k minimum RAM.

•  386 minimum microprocessor.

•  minimum 2 megabytes space on the hard disk.

2.1.1  LOADING PC-DBA SOFTWARE

When you download PC-DBA from the Vertical>Comdial web site it is contained in an archived format to 
expedite the download.  It is recommended that you perform the following steps when downloading PC-DBA.

1.  Create a separate directory on the PC where you can load PC-DBA (typically “DX-80”).  This becomes the 

working directory.

CAUTION

PC-DBA is available on the Vertical>Comdial Web page 

at 

www.vertical.com

. 

This software is not available by any other means.  

 You must have a well-rounded understanding of the PC environment and the DOS file structure to 

use this DX-80 utility.  Users who are unfamiliar with these basic requirements cannot be sup-

ported.  If any of these issues concern you, program the DX-80 instead by using any DET phone.  

(See Section 2.2, 

Using Any Digital Extension Telephone (DET)

).

DX-80 Programming Manual

Summary of Contents for Comdial DX-80



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands