Vertical Comdial DX-80, Technical Manual

Page: 108 / 322

P
ROGRAMMING
S
YSTEM
F
EATURES
> C
USTOMIZING THE
N
UMBERING
P
LAN
DX-80 Programming Manual
- 108 -
2. In the Length field, enter the number of digits you want to use in extension numbers, and press Enter . Valid
extension lengths are between 1 and 4 digits; the default is 3.
3. In the Leading 1 field, enter the digits you want to require as the beginning digits in your extension numbers
(if any), and press Enter . For example, if you want all of your extension numbers to begin with 5, enter 5
here. Or, to allow only extension numbers 590 through 599, enter 59 (assuming a 3-digit length). The
default is 1, so the default extension numbers include 100 through 199.
4. In the Leading 2 field, enter the digits you want to require for an additional range of extension numbers (if
any), and press Enter . For example, if you want to allow extension numbers 570-579 in addition to exten-
sion numbers you specified in the Leading 1 field, enter 57 here.
5. In the same manner, assign the remaining leading digits as needed. The default for the second through the
eight leading digit is NULL.
6. When you are done, press Esc to return to the System Application menu. The system prompts: “Exit This
Feature?”; press Y for yes.
7. The system prompts “Save Current Setting?” Press Y to save your changes.
8. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
9. Press Esc to return to the System Application menu.
4.20.2.3 Numbering Plan 3
The third page of the numbering plan allows you to specify the amount of digits in the extension paging, hunt, and
pickup group directory numbers, and what directory numbers you want extension users to dial to access their page,
hunt, or pickup group.
This page also allows you to set up the length of individual and system speed dials, and what numbers you want
extension users to enter to access either an individual speed dial or a system speed dial.
Note : The system does not
allow you to assign the same set of numbers to different types of directory numbers. For example, if you leave the
system default for extension numbers set to 100-199, you cannot also assign any number within that range to page
groups, hunt groups, speed dial numbers, etc.
1. Highlight Numbering Plan 3 on the System Application menu and press Enter. The system displays the
System Application—Numbering Plan 3 screen.