SL2100 Quick Guide
Handset Layout
Soft Touch Keys
The NEC handsets have menus that can be accessed by
Pressing the buttons below the LCD screen. There are 4 soft
Touch keys that change depending on the mode you are in.
Line Keys / DSS Keys
The top line
is programmed as “Line Keys” they shows lines
4 & 5 are in use. The bottom line is programmed as Direct
Station Select (DSS) keys in this example
Joel’s extension is
Busy.
Navigation / Scroll Keys
Used for:
o
Speed dials.
o
Inbound call register.
o
Outbound call register.
o
Volume control.
Making Outside Calls
o
Lift handset.
o
Dial 0.
o
Dial telephone number.
Put a call on Hold
o
Press the Hold key during a call.
o
Outside calls will flash on the Line key.
o
Press the flashing key to retrieve the held call.
Transferring a Call
Without DSS keys
Method 1
. ( Blind transfer )
o
Press the Transfer Key during a call.
o
Dial the required extension number.
o
Hang up to send the call through.
Method 2
( Announced transferred )
o
Press the Transfer Key during a call.
o
Dial the required extension number.
o
Wait for answer, announce the call.
o
Hang up to send the call through.
o
Or select green flashing line if called party does not
Want to take the call.
With DSS keys
Method 1
(Blind transfer)
o
Press the DSS key during a call.
o
Hang up to send the call through.
Method 2
(Announced transferred)
o
Press the DSS key during a call.
o
Wait for answer, announce the call.
o
Hang up to send the call through.
o
Or select green flashing line if called party does not
Want to take the call.
