manualshive.com logo in svg

Toshiba Tecra R10, Maintenance Manual

Share
Download
Toshiba Tecra R10 Maintenance Manual Download Page 36

1  Hardware Overview 

1.9 Power Supply 

1-22 

[CONFIDENTIAL] 

TECRA R10 Maintenance Manual (960-708) 

1.9 Power 

Supply 

The power supply supplies many different voltages to the system board and performs the 
following functions: 

1.

 

Judges that the DC power supply (AC adapter) is connected to the computer. 

2.

 

Detects DC output and circuit malfunctions. 

3.

 

Controls the battery icon, and DC IN icon. 

4.

 

Turns the battery charging system on and off and detects a fully charged battery. 

5.

 

Turns the power supply on and off. 

6.

 

Provides more accurate detection of a low battery. 

7.

 

Calculates the remaining battery capacity. 

8.

 

Controls the transmission of the status signal of the main battery. 

The power supply output rating is specified in Table 1-6. 

Summary of Contents for Tecra R10





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands