manualshive.com logo in svg

Toshiba Tecra R10, Maintenance Manual

Share
Download
Toshiba Tecra R10 Maintenance Manual Download Page 215

3.32 SETUP 

3 Tests and Diagnostics 

TECRA R10 Maintenance Manual (960-708) 

[CONFIDENTIAL] 

3-93 

Processing Speed

This feature changes the CPU processing speed.  

High

   

 

 

CPU operates at high speed. (Default in Full Power Mode) 

Low

   

 

 

CPU operates at low speed. (Default in Low Power Mode) 

CPU Sleep Mode 

Use this option to enable or disable the CPU sleep function.  

Enabled

   

 

Enables sleep mode. (Default) 

Disabled

 

  Disables 

sleep 

mode. 

LCD Brightness

Use this option to set the level of LCD brightness. 

Super-Bright

  

Full brightness for maximum visibility. 

Bright

  

 

 

Full brightness for high visibility. 

Semi-Bright

   

Less than full brightness for saving power. 

Cooling Method 

Maximum Performance  

If the CPU becomes too hot, the fan turns on 
automatically in a high speed to cool down the 
CPU. 

Performance 

    

If the CPU becomes too hot, the fan turns on 
automatically.  When the CPU temperature falls 
to a normal range, the fan turns off. 

Battery optimized 

 

 

If the CPU becomes too hot, the processing 
speed is lowered. If the temperature is still too 
high, the fan turns on. When the CPU 
temperature falls to a normal range, the fan is 
turned off and the processing speed is increased. 

NOTE: Too hot condition may cause defect on the CPU. When the hot condition 

continues, the power is automatically turned off in resume mode. 

Summary of Contents for Tecra R10





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands