manualshive.com logo in svg

Toshiba Tecra R10, Maintenance Manual

Share
Download
Toshiba Tecra R10 Maintenance Manual Download Page 202

3 Tests and Diagnostics 

3.30 Sound Test program 

TECRA R10 Maintenance Manual (960-708) 

[CONFIDENTIAL] 

3-80 

3.30  Sound Test program 

Sound TEST disk cannot be used in TECRA R10. 

Therefore, please  test  the sound on Windows OS. 

1) Play a music file. 

2) click TOSHIBA-> utility -> "PC diagnostic tool." to test  the sound  

Please check operation of speakers by one of methods. 

 

3.31  3G Test program 

Therefore, please  test  the sound on Windows OS. 

All the programs included in EU870 test CD are install. 

A procedure should look at ToshibaTestTools_ReleaseNotes.txt. 

Please uninstall after the completion of a EU870 test. 

 

Summary of Contents for Tecra R10





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands