manualshive.com logo in svg

Toshiba Tecra R10, Maintenance Manual

Share
Download
Toshiba Tecra R10 Maintenance Manual Download Page 216

3 Tests and Diagnostics 

 3.32 SETUP 

3-94 [CONFIDENTIAL] 

TECRA R10 Maintenance Manual (960-708) 

(b)

 

PCI Express Link ASPM 

This option set the power-saving function of PCI Express on the following 
conditions. 

Auto   

 

 

 

 

PCI Express devices are not used while battery 
operation. (Default) 

Disabled   

 

 

 

 

Disable the Power-saving function and drive 
with maximum performance. 

Enabled   

 

 

 

 

PCI Express devices are not used. 

(c)

 

Enhanced C-States 
*Core2 model only 

This option set the power-saving function of Enhanced C-States on the 
following conditions.

 

Enabled   

 

 

 

 

This lowers the power consumption. (Default) 

Disabled   

 

 

 

 

This does not lower the power consumption.  

9.

 

Drives I/O 

This option displays the address and interrupts level for hard disk drive and optical 
disk drive. It is for information only and cannot be changed. 

(a)

 

Built-in HDD 

This item displays the Serial ATA Port Number. It is for information only and 
cannot be changed. 

Serial ATA Port0 

(b)

 

ODD 

This item displays the Serial ATA Port Number. It is for information only and 
cannot be changed. 
Serial ATA Port1 

(c)

 

eSATA 

This item displays the Serial ATA Port Number. It is for information only and 
cannot be changed. 

Serial ATA Port4 

Summary of Contents for Tecra R10





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands