manualshive.com logo in svg

Toshiba Tecra R10, Maintenance Manual, Page: 217 / 388

Share
Download
Toshiba Tecra R10 Maintenance Manual Download Page 217

3.32 SETUP 

3 Tests and Diagnostics 

TECRA R10 Maintenance Manual (960-708) 

[CONFIDENTIAL] 

3-95 

(d)

 

 SATA Controller Mode 

                         This feature sets the SATA Controller Mode. 

AHCI

    

  

Sets AHCI which is the mode for VistaTM (default) 

Compatibility   

 

Sets the mode for legacy OS. Use this mode when the 

driver corresponding to AHCI is not used. 

  

 

10.

 

PCI Bus 

This option displays the interrupt level for the Card Bus in the computer. It is for 
information only and cannot be changed. 

 

PCI BUS   

= IRQ10, IRQ11

 

11.

 

Display 

This group of options configures the computer’s display. 

(a)

 

Power On Display 

This option is used to select the display when booting up. 

Auto-Selected

  

 

Selects an external monitor if one is connected. 
Otherwise it selects the internal LCD. (Default) 

LCD+AnalogRGB

  Selects both the internal LCD and the external monitor 

for simultaneous display. 

 

NOTE: Pressing 

Fn+F5

 changes the display setting in the order of internal LCD to 

simultaneous to external monitor. 

 

12.

 

Peripheral 

Use this option to select the peripheral’s mode.   

(a)

 

Internal Pointing Device 

This option enables or disables the touch pad 

Enabled 

 

 

Enables the touch pad. (Default) 

Disabled 

 

 

Disables the touch pad.  

Summary of Contents for Tecra R10





































































































































































































































































































































































































Reviews:

No comments