manualshive.com logo in svg

Toshiba Tecra R10, Maintenance Manual

Share
Download
Toshiba Tecra R10 Maintenance Manual Download Page 172

3 Tests and Diagnostics  

3.20 ONLY ONE TEST   

3-50  

[CONFIDENTIAL] 

TECRA R10 Maintenance Manual (960-708) 

Subtest A 

E2PROM (Internal MAC) 

It checks whether the MAC address.. 

 

Subtest B 

Intel AMT 

It checks whether the Intel AMT corde versions information are written. 

Intel Kedron

 is required for an 

Intel 

AMT check. 

BIOS should be 

Intel

 AMT correspondence. 

 

Subtest C 

Intel Shirley Peak (MAC)  

 

The functional check of 

Shirley Peak

 and a MAC Address check are carried 

out.

 

Subtest D   

SD Card (R5C833 Writh/Read) 

 

The functional check of SD Card. 
 
Enter the E key and insert an SD card. 
Pressing any key will start the test. 
 
If the test result is O.K., remove the SD card. 
 
If it is NG, check the error message. 
 

NOTE:SD card specifications which can be used for this test are shown below. 

   

 

- Classical SD Card (V1.00) for Normal Speed (max 25MHz) 

   

 

- High Speed SD Card (V1.10 optional) for High Speed (max 50MHz) 

   

 

- SDHC (>= 4GB) Supported 

   

 

* SDIO devices are not supported 

 

   

 

As for the SD card specification which can be used in WINDOWS, check the 

 product specification. 

. 

 

Summary of Contents for Tecra R10





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands