Toshiba Tecra R10 Maintenance Manual Download Page 208

Page: 208 / 388

3 Tests and Diagnostics

3.32 SETUP

3-86 [CONFIDENTIAL]

TECRA R10 Maintenance Manual (960-708)

SETUP Options

The SETUP screen is divided into 14 functionally related groups. This section describes each
group and its options.

Memory

This group of options displays the computer’s memory.

This field displays the total amount of memory installed and is automatically
calculated by the computer. You cannot change this value.

System Date/Time

Sets the date and time.

System Date

Sets

date.

System Time

Sets

time.

Password

(a) User Password

This option allows you to set or reset the user password for power on.

Registered

A password has been registered.

Not Registered

Change or remove the password. (Default)

(a)

Supervisor Password

This setting, which is displayed on the first page of the setup screen, allows you
to register a Supervisor Password of the computer.

Registered

Supervisor Password has been registered.

Not Registered

Supervisor Password has not been registered (Default).

For details on setting the password, refer to the Online Manual.

HDD Password

This option sets HDD password. HDD password is a security function to protect the
built-in HDD.

(a)

HDD

This item selects the hard disk to set HDD password.

Built-in HDD

Sets HDD password for the built-in HDD

Summary of Contents for Tecra R10





































































































































































































































































































































































































Search results

Summary of Contents for Tecra R10

Reviews:

Brands by name

Popular brands

Toshiba Tecra R10, Maintenance Manual

Search results

Summary of Contents for Tecra R10

Reviews:

Brands by name

Popular brands