ThermoFisher Scientific EZx, User Manual

Page: 75 / 242

Operation
Thermo Fisher Scientific Operation 3-27
REC 4132 Rev E
•
Reject Package Signal –
for combo units (combination X-ray and
checkweighing machines). Tells the checkweigher not to weigh
the package and the package is rejected by the
X-ray
system.
•
Lamp1 –
lamp on the stack that indicates a good package
•
Lamp 2 –
lamp on the stack indicating a bad package
Note. Lamp 1 and Lamp 2 are optional and can be added to the
stack if needed.
▲
•
Ready –
this output is activated when the machine is ready to
inspect product – belt running,
X-ray
s on, and at correct level
and inspecting product.
Note. Reject Package Signal is designed for combo setup when
the user has an
EZx
followed by a checkweigher in the production
line. It tells the checkweigher the package is to be rejected so it
does not need to be weighed.
▲
A96721
Figure 3–26. Output Assignments