ThermoFisher Scientific EZx, User Manual

Page: 73 / 242

Operation
Thermo Fisher Scientific Operation 3-25
REC 4132 Rev E
A96644
Figure 3–24. Other Devices Screen
At this screen, the setup is the normal state of the input
indicating everything is operating properly. If the device changes
from the normal state then something is not working properly
and an alarm is activated.
EXAMPLE:
If air pressure is setup and the air pressure changes
state (something goes wrong i.e. pressure drops) the air pressure
alarm is activated. The external alarm label is reported in the log
when the alarm is active.
The
EZx
has the capacity to configure 7 outputs with 10 output
assignments. Output 8, the Cooling Device, cannot be un-assigned or be
configured to another output type.
Note: The default outputs for the EZx software are Output 1
assigned to Reject Verify, Output 2 assigned Alarm, and Output 8
assigned Cooling Device.
▲
Output Setup