Thermo Scientific 146i, Instruction Manual

Page: 99 / 340

Operation
Instrument Controls Menu
Thermo Fisher Scientific Model 146 i Instruction Manual 3-57
The Alarms status screen allows the user to select the alarm status for the
selected relay output. The selected item is shown by “<--” after it.
●
In the Main Menu, choose Instrument Controls > I/O Configuration >
Output Relay Settings > Select Relay > Instrument State >
Alarms .
ALARM STATUS ITEMS:
>NONE
GEN ALARM
AMBIENT TEMP
O3 LAMP TEMP
PERM GAS TEMP
PRESSURE
PHOT BENCH TEMP
ª
OPER MODE DIAGS ALARM
PHOT LAMP TEMP
PHOT INTENSITY
O3 LEVEL
The Non-Alarm status screen allows the user to select the non-alarm status
for the selected relay output. The selected item is shown by “<--” after it.
For more information on the I/O connections, see “
Remote
Interconnections ” in the “ Installation ” chapter.
●
In the Main Menu, choose Instrument Controls > I/O Configuration >
Output Relay Settings > Select Relay > Instrument State >
Non-Alarm .
NON ALARM STATUS ITEMS:
>NONE
GAS BIT 1 <--
GAS BIT 2
GAS BIT 3
SPAN BIT 1
SPAN BIT 2
SPAN BIT 3
ª
OPER MODE DIAGS ALARM
O3/PERM BIT 1
O3/PERM BIT 2
O3/PERM BIT 3
O3/PERM BIT 4
PHOTO BIT 1
PHOTO BIT 2
GAS A
GAS B
GAS C
GAS D
GAS E
GAS F
Alarms
Non-Alarm