Thermo Scientific 146i, Instruction Manual

Page: 94 / 340

Operation
Instrument Controls Menu
3-52 Model 146 i Instruction Manual Thermo Fisher Scientific
LAMP TEMP
O3 LAMP TEMP
INTENSITY
NOISE
The Analog Inputs screen allows the user to select the analog input signal
(none or analog inputs 1-8) that is tied to the selected streaming data item.
The selected item is shown by “<--” after it.
●
In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config > Select Item >
Analog Inputs .
ANALOG INPUTS:
>NONE
ANALOG IN 1
ANALOG IN 2
ANALOG IN 3
ANALOG IN 4
ANALOG IN 5
ANALOG IN 6
ª
OPER MODE DIAGS ALARM
The RS-232/RS-485 Selection screen allows the user to choose between the
RS-232 or RS-485 specification for serial communication.
Note Disconnect the serial cable before changing RS-232 and RS-485
selection to prevent damage to the connected equipment. ▲
●
In the Main Menu, choose Instrument Controls > Communication
Settings >
RS-232/RS-485 Selection .
Analog Inputs
RS-232/RS-485 Selection
RS-232/RS-485 SELECTION:
XXXXXX ** WARNING ** XXXXXXX
DISCONNECT THE SERIAL X X
CABLES BEFORE CHANGING X
THE SELECTION! XXXXXX
ƒ TO CONTINUE
OPER MODE DIAGS ALARM
RS-232/RS-485 SELECTION:
CURRENTLY: RS-232
SET TO: RS-485 ?
MAKE SURE THAT THE CABLE XX
IS OFF: PRESS ¨ TO CONFIRM
ƒ
TOGGLE VALUE
OPER MODE DIAGS ALARM