Thermo Scientific 146i, Instruction Manual

Page: 101 / 340

Operation
Instrument Controls Menu
Thermo Fisher Scientific Model 146 i Instruction Manual 3-59
DIGITAL INPUT SETUP:
>LOGIC STATE OPEN
INSTRUMENT STATE
OPER MODE DIAGS ALARM
The Instrument Action screen allows the user to choose the instrument
action that is tied to the selected digital input.
●
In the Main Menu, choose Instrument Controls > I/O Configuration >
Digital Input Settings > Select Relay >
Instrument Action .
CHOOSE ACTION:
>NONE
GAS BIT 1 <--
GAS BIT 2
GAS BIT 3
SPAN BIT 1
SPAN BIT 2
SPAN BIT 3
ª
OPER MODE DIAGS ALARM
O3/PERM BIT 1
O3/PERM BIT 2
O3/PERM BIT 3
O3/PERM BIT 4
PHOTO BIT 1
PHOTO BIT 2
AOUTS TO ZERO
AOUTS TO FS
The Model 146 i can drive up to eight external solenoids. You can select the
external solenoids with the External Solenoids menu. Each solenoid can be
connected to the following: Gas A, B, or C (or D, E, or F if the six gas
option is installed), the ozonator, or the permeation oven.
●
In the Main Menu, choose Instrument Controls > I/O Configuration >
External Solenoid s .
Instrument Action
External Solenoid
Settings