T A L K S W I T C H C O N F I G U R A T I O N
132
b) If you selected
go to auto attendant
, select the auto attendant you wish to play in the
selected mode. You can assign the same auto attendant to multiple telephone lines.
Alternatively, if different organizations share the TalkSwitch system, a different auto
attendant can be assigned to each telephone line.
c) If you selected
go to voicemail
or
play announcement
, select the voice mailbox. You can
select a local extension mailbox, remote extension mailbox, or general voice mailbox.
d) Select when the system will perform call handling. Choices are:
•
immediately
— The system will immediately perform call handling without using the
ring sequence. Selecting
immediately
will disable the
Edit
button and the other ring
sequence controls.
•
after 1 ring
to
after 9 rings
— The system will follow the ring sequence first, and
then perform call handling if no one answers.
Line optimization
The
Line Optimization
area allows you to calibrate the TalkSwitch unit to match the telephone
lines. Calibration optimizes transmission for the type of telephone line or equipment connected
to the TalkSwitch unit by setting the far end impedance. Calibration improves performance for
call bridge (DISA) and call forwarding.
You should calibrate the lines:
•
After adding or changing a telephone line.
•
After connecting a line to equipment other than a telephone company line.
•
If poor audio performance is encountered.
1. Click
Calibrate Lines
. The
Calibrate Lines
window appears.
2. Select the line(s) to calibrate, and then click
Run Calibration
.
