T A L K S W I T C H C O N F I G U R A T I O N
155
1. If the route requires one carrier code for the whole day:
a) Enter the carrier code in
Carrier code 1
.
b) Clear the
Carrier code 2
check box.
2. If the route requires two carrier codes, one for each part of the day:
a) Enter the first carrier code in
Carrier code 1
.
b) Enter
Start time 1
.
c) Select the
Carrier code 2
check box.
d) Enter the second carrier code in
Carrier code 2
.
e) Enter
Start time 2
.
Emergency service numbers
The
Emergency Service Numbers
area lists the emergency service numbers that cannot be blocked
by toll restriction.
Auto route selection
The
Auto Route Selection
area allows you to set the inter-digit timeout (IDT), and to select the
hunt groups that are subject to ARS.
1. Select the
Inter-digit timeout (IDT)
. The default value is
5 seconds
. Choices range from
3
seconds
to
18 seconds
.
ARS and toll restriction are implemented on each call once the longest matching entry is
found in the ARS table or after the IDT expires. If the user has dialed a number and it’s a
possible match for an entry in the ARS table, the system will pause until the IDT expires. To
complete a dialed number before the IDT expires, the user can press
#
.
For example, the ARS table has 12345. The user dials hunt group 88 to use the TalkSwitch
VoIP network, and dials VoIP number 1234. This is a possible match for entry 12345, so
system will pause until the IDT expires. The user can press
#
to complete the call.
2. Select the hunt groups that are subject to ARS and toll restriction.
a) Click
ARS Hunt Groups
. The
ARS Hunt Groups
window appears.
b) Select the
Hunt group
check boxes. The selected hunt groups will be subject to ARS and
toll restriction.
