V O I P I N F O R M A T I O N
228
3. Select
Profile TS
, which is for configuring the TalkSwitch profile.
4. Leave the
This TalkSwitch location is the proxy/registrar
check box cleared.
5. Enter the
Current public IP address
or
Fully qualified domain name
(FQDN) of the SIP server
into the
Proxy/registrar server name
box.
If the SIP server is using a non-default
SIP signalling port
(i.e. if the SIP server is not using
5060 as the
SIP signalling port
), specify the port number after a colon at the end of the
public IP address or FQDN (e.g. 123.45.67.89:3456).
6. Enter the
User/account
name from the SIP server. All SIP clients must use this name.
7. Enter the
Password
from the SIP server. All SIP clients must use this password.
CONFIGURING VOIP NUMBERS FOR A TALKSWITCH VOIP NETWORK
A VoIP number is like a telephone number, and is used to dial a TalkSwitch system at a particular
location. Each VoIP number must be unique (i.e. only used at one location).
VoIP numbers 250 to 299 permit direct dialing from any extension, auto attendant or call
cascade to any extension, auto attendant or voice mailbox in the TalkSwitch VoIP network. No
hunt group number is required. Longer VoIP numbers can also be used, but the user must first
dial a hunt group number.
To assist in assigning VoIP numbers for your network, use the
TalkSwitch VoIP network
administration form
on page 241.
