T A L K S W I T C H C O N F I G U R A T I O N
51
a) Choose
Options > VoIP Trunking
. The
VoIP Settings
window appears.
b) Select the
Re-registration interval
.
c) Enter the
SIP signalling port
.
d) Enter the
Starting RTP port
.
e) Ensure the router is set up to perform port forwarding for the SIP signalling and RTP
ports. See
Router port forwarding
on page 36.
TalkSwitch SIP client profile
If the SIP server is at another location, the
Registration Details
area allows you to enter the
Proxy/registrar server name
.
1. Leave the
This TalkSwitch location is the proxy/registrar
check box cleared. The page disables
the
Registrar authentication
list and the
View Registrar Entries
button.
2. Enter the
Current public IP address
or
Fully qualified domain name
(FQDN) of the SIP server
into the
Proxy/registrar server name
box.
3. If the SIP server requires a non-default SIP signalling port (i.e. if the SIP server cannot use
5060 as the SIP signalling port), specify the port number after a colon at the end of the
public IP address or FQDN (e.g. 123.45.67.89:3456).
4. Ensure the router is set up to perform port forwarding for the SIP signalling port. See
Router
port forwarding
on page 36.
Service provider profile
If setting up a service provider profile, the
Registration Details
area allows you to enter the
proxy server name, registrar server name, outbound proxy, and realm/domain, as provided by
the service provider.
1. Enter the IP addresses or FQDNs, as provided by the service provider, into the following
boxes. If the service provider does not specify a value, leave the box blank.
•
Proxy server name
•
Registrar server name
•
Outbound proxy
•
Realm/domain
For information on entering the registration details, see the service configuration guide for
your VoIP service provider.
