T A L K S W I T C H C O N F I G U R A T I O N
173
Defaults > Current Page
The
Defaults > Current Page
command resets the current page of the configuration to
default values.
Check for Updates
The
Check for Updates
command looks for updates to the firmware or TalkSwitch management
software on the TalkSwitch website.
Update Firmware
The
Update Firmware
command shows the firmware version of the TalkSwitch units and the
latest firmware version available with the TalkSwitch management software. It allows you to
update the TalkSwitch units with a newer firmware version.
1. Choose
Tools > Update Firmware
. The
TalkSwitch Firmware Update
window appears.
2. If the
Firmware detected
is lower than the
Firmware file
:
a) Set the
Auto-Reboot
check box.
•
Select
Auto-Reboot
to automatically reboot the TalkSwitch units once the firmware
has been updated. This will cancel any calls in progress.
•
Clear
Auto-Reboot
to prevent the TalkSwitch units from rebooting automatically. You
will have to manually reboot the TalkSwitch units later, when there are no calls in
progress. See
Reboot TalkSwitch
on page 173.
b) Click the
Update
button.
Reboot TalkSwitch
The
Reboot TalkSwitch
command reboots the TalkSwitch units at the specified time. This is
required after updating the firmware, unless you selected the
Auto-Reboot
check box, and the
TalkSwitch units rebooted automatically.
